1st time making CDS

I made a double infusion batch of CDS. Just wanted to make sure my test is correct.
I put 6 ml water in a shot glass, then added 2 ml of cds. It showed as 250 ppm . 
I had read that 2ml should equal 1 drop mms at 3000 ppm. 
so I re-did my test with 3 ml of my cds + the 6 ml of water and it showed as 500 ppm, which is what my goal was. 
So, to dose with my cds, how much water do I put with my 3 ml ?  Is it like mms where I add my activated sodium chlorite to 4 oz of water?
How do most people use CDS?

 

wrote:

I made a double infusion batch of CDS. Just wanted to make sure my test is correct.
I put 6 ml water in a shot glass, then added 2 ml of cds. It showed as 250 ppm . 
I had read that 2ml should equal 1 drop mms at 3000 ppm. 
so I re-did my test with 3 ml of my cds + the 6 ml of water and it showed as 500 ppm, which is what my goal was. 
So, to dose with my cds, how much water do I put with my 3 ml ?  Is it like mms where I add my activated sodium chlorite to 4 oz of water?
How do most people use CDS?





 

Do it like Andreas Kalcker does it - mix 1ml CDS and 9ml water (he did it in a syringe), and it should give you 300ppm on the test strip.
www.brighteon.com/95b304c7-e0a4-4606-ac44-303c8fa3ec9e

Check out Protocol A and C for dosage, but it's usually 10ml of pure CDS to 1000ml (1 litre) of water, which equals 8-12 doses.
andreaskalcker.com/en/cds-clo2/cds-protocols.html

mmsinfo.org/infosheets/measuring_the_strength_of_CD_CDS_CDH.pdf