disinfect water

does anyone have a recipe on how to disinfect river water or rainwater with MMS?
How many drops for 1 liter of water?
Is it 100% okay to drink?
 

I would still filter the water before drinking it. I think 1 drop CDS per liter should be enough to disinfect water (please correct me if I'm wrong), but you can't get coarser dirt and heavy metals out of the water, so you should still use a water filter.

From experience I can say that this water filter (unlike many others) can really lower the PPM value of the water drastically. www.amazon.com/FS-TFC-Super-high-Precision-Purification-Preparedness/dp/B087N3P6Q2/ref=sr_1_1?dchild=1&keywords=water+purifier+0%2C0001+micron&qid=1617556969&sr=8-1

And I would first disinfect the water with CDS and then filter it, in that way you can really be sure that you do not have to drink dirty water on camping or trekking trips. By the way, rainwater is "relatively" clean (with us/Germany it has about 9 PPM), although it also depends on the location and where you are (so keyword air pollution/chemtrails etc.).

thanks for the reply!
I wonder if 1 drop of CDS is really enough?
How long can I have this water in stock if e.g. made 100 liters of water and would put 100 drops of CDS in it, could I use it for 1 month, or should I add some more CDS in between?
Thank you for your time!

Look on pages 4 and 5 in this PDF file.  

If adding CDS to a large supply of water, you could measure CLO2 ppm with low range CLO2 test strips. Then you would know when to add more CDS.

many thanks!!
What about the pool, how many drops of what should I add for 3500 gallons of water (or 1 gallon)? Since the pool is open, do I have to add MMS every day?
THANK YOU AGAIN!

Well, that is a lot of water. I think CLO2 is used for swimming pools. Look into that and let us know what you find. Thanks. 

many thanks!!
if you put inactivated MMS in water, how is it activated in water then because there is no acid?

I am not sure Marti, but somehow MMS will slowly release CLO2 into the water. If you put just CLO2 into water, it would quickly evaporate. 

thanks for the reply!
You make NaClO2 powder with distilled water, according to the recipe and you call it MMS. Distilled water has a pH of about 5 (it is acidic), and ordinary tap water has a pH of 7 and above (it is basic). If MMS is activated in water, why not activate MMS that is also in water?
all the best and thanks again for the answers!

If you mean to ingest unactivated MMS and let stomach acid activate it, that is what Jim Humble was doing when he gave stabilized oxygen to the workers who had malaria in 1996. 

If you put MMS into potable water and wait for it to activate, apparently that works, too. But if the potable water is alkaline, you wonder how could it activate MMS. 

MMS is very alkaline, about pH 14 I think. So, if you put MMS in water that is pH 7, the difference in pH may be enough to cause some slow activation of MMS.